How To Remove Cell Phone Popsocket

Download Commodity

Download Article

Popsockets are 1 of many trendy items to hit the scene, and for good reason. If you lot own one, you know how fun it is to utilise! Once attached to your telephone or tablet, you lot can fiddle with the top of a popsocket by pulling it in and out. However, you lot may eventually want to remove your popsocket and stick it somewhere else. Doing this is very like shooting fish in a barrel. All you have to do is slide your fingernails underneath the base and tug lightly.

1. 1

   Button the acme of the popsocket downward if information technology's expanded. Don't try to remove the popsocket from your device while information technology is still expanded. The popsocket could potentially detach from its base of operations during the removal process.

2. ii

   Work your fingernails under the base of the popsocket. Press your fingernails confronting the sides of the popsocket's base and push button until you can feel them sliding underneath. Yous don't need to push very far—just enough until you have a proficient grasp on the popsocket. You should already be able to feel the base of the popsocket pulling away from your telephone.^[1]

   • Slide a few inches of dental floss under your popsocket if your fingernails won't fit under the base.

   Advertizement

3. 3

   Pull the popsocket off of your phone slowly. Grip the popsocket lightly as y'all pull. Work slowly and gently until the popsocket comes off. Try peeling the popsocket off, starting from one side and pulling toward the other.^[2]

Advertisement

1. i

   Run the base of the popsocket nether cold h2o for iii seconds. Your popsocket is small and already very sticky, then y'all won't need a lot of h2o to clean information technology and help it restick. Also much h2o could lengthen its drying time past the 15 minute limit and ruin its stickiness.

2. 2

   Let the popsocket dry for effectually x minutes. Leave your popsocket out in the open up air to dry naturally. Lay information technology on a paper or textile towel with the gummy side facing upwardly.

   • Avoid letting your popsocket sit out for whatsoever longer than 15 minutes. Otherwise, it volition lose its ability to stick.
   • If your popsocket all the same isn't dry after ten minutes, wipe the base gently with a paper towel.

3. iii

   Stick the popsocket back onto your phone or another flat surface. Any make clean, flat surface will exercise. Nonetheless, go on in mind that a popsocket may not stick as well to surfaces made from leather or silicone, or waterproof surfaces. Mirrors, windows, tablets, and smartphones are the all-time surfaces to attach a popsocket to.

   • Let your popsocket rest for effectually 1 hr before expanding or closing it. This will requite it plenty fourth dimension to fully adhere to your phone again.

Advertisement

Add New Question

• Question

  Is it rubber to throw away my PopSocket after information technology's been used?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Yes, information technology is safe to throw away your PopSocket. Try to reuse it as much every bit possible (it should last for at to the lowest degree 100 times removal and reattachment and around 12,000 times of expansion and collapse according to the manufacturer), to make the most of information technology and keep information technology out of landfill that piddling bit longer. A quick search of the PopSockets website as of April 2022 failed to produce an answer as to the product'southward ability to exist recycled, perhaps email them if y'all wish to discover out.

• Question

  Tin can I utilise a PopSocket in the car?

  

  This answer was written past one of our trained team of researchers who validated information technology for accurateness and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Yep, at that place is a special car vent mount that can exist purchased and attached to an air vent of your auto. Once in identify, simply slide the PopSocket into the mount and information technology'll hold your phone in place.

• Question

  Can you reuse a PopSocket?

  

  This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Respond

  Yeah, you tin can reuse a PopSocket; the manufacturer claims it can be reused up to 100 times. After removing the PopSocket, take care to reattach it inside 15 minutes; oherwise, leaving information technology exposed to air tin can dry out the gel. Bank check the stickiness of the grip before reusing; if it seems less pasty, this tin be reactivated by dipping the grip into a little h2o, and then leaving the PopSocket on a dish to air dry for well-nigh ten minutes. So it'll be ready to reattach to your phone or other surface.

• Question

  Are PopSockets waterproof?

  

  This respond was written by one of our trained squad of researchers who validated information technology for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Yep, PopSockets are waterproof. They are made from a mix of polyurethane, polycarbonate and TPU, which ensures they're waterproof. Still, while the PopSocket is waterproof, your phone isn't, and then exist conscientious when placing the phone near h2o.

• Question

  What is the purpose of a PopSocket?

  

  This answer was written by 1 of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  A PopSocket is basically a small stand or a grip for your telephone or tablet device. Once the PopSocket is in identify (or you lot tin add ii to a larger device, if needed), it allows you to residue the phone on surfaces or grip the telephone with ease. Information technology also has a gap suitable for wrapping your earbuds around when they're not in use, to forbid them from tangling.

• Question

  How do you fix a PopSocket that won't stick?

  

  This answer was written by ane of our trained team of researchers who validated it for accurateness and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  Dip the grip of the PopSocket into a lilliputian h2o for a few seconds to reactivate the stickiness, then let information technology dry for nigh 10 minutes before reattaching. If this fails to work, it's possible the PopSocket has been reused so many times it's no longer able to be reused (the manufacturer suggests is can be removed and reattached at to the lowest degree 100 times before it stops working).

• Question

  Can I reattach it to another case?

  

  Blue Dolfin (BlueDolfin2004)

  Community Answer

  Yep, unless the example is leather, waterproof, or fabricated of rubber/silicone, then it won't hold every bit well if at all.

• Question

  My popsocket just won't come off. I've tried using thread because there's no dental floss in my house, merely it didn't work. What can I practice?

  

  If you are having problem removing popsocket, then you tin use tools such as a pair of scissors or a razor to wedge underneath the adhesive. Just be careful not to cut yourself!

• Question

  How can I remove it with curt nails and without dental floss?

  

  I slid my credit card between the phone and PopSocket and it worked great.

• Question

  What practice I do if my PopSocket popped off its base? How practice I reattach it?

  

  Take the top and insert one tab in the aligning hole, the repeat. On the concluding hole, use your fingernails to pull open the base a bit and it should be working once more.

Bear witness more answers

Enquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advert

Video

1. To remove a Popsocket that has a finger loop instead, utilise your fingernail to slightly pry and elevator up the Popsocket to unstick it from the adhesive. Then apply a thin apartment tool (such as a dull butter knife) to slowly elevator up the Popsocket fifty-fifty more until it comes off your phone completely.

• If your nails aren't long enough or if you lot're worried nigh them breaking, use a newspaper clip or safety pin.

• Don't worry about adjustment the graphic on top of your popsocket as yous reposition information technology. Yous can fix the graphic's positioning by twisting the top of the popsocket once yous reattach it.^[3]

Thanks for submitting a tip for review!

Ad

About This Commodity

Commodity Summary X

If yous need to remove a popsocket from your phone, push downwards on the top of the popsocket to ensure it's not expanded. Piece of work your fingernails under the base of the popsocket, then slowly peel the popsocket off of your phone. If your fingernails won't fit, attempt sliding a few inches of dental floss under the popsocket instead. Proceed reading to learn how to make clean and reattach the popsocket!

Did this summary assistance y'all?

Thank you to all authors for creating a page that has been read 620,847 times.

Is this commodity up to appointment?

Source: https://www.wikihow.com/Remove-a-Popsocket

Share this post